Excavator specialists on call — same-day quotes for fleet orders. Request Quote Now →
Excavator Insights

Who Should Inspect a Crane? And Other Questions I Ask Before Buying Equipment Parts

Posted on Friday 13th of November 2026 by Claire Dubois

The short answer

Whether you're buying ESCO wear parts, ESCO elevator components, Crewe tractor parts, or a Honda generator—or just asking who should inspect a crane—the purchasing logic is the same: verify the vendor and the paperwork, not the cheapest quote.

On the crane question specifically, the answer lives in OSHA 29 CFR 1926.1412, not in a supplier's proposal. Different inspection levels require different people—and at least the annual comprehensive inspection has to be done by a "qualified person," which OSHA defines with a specific meaning. More on that below.

Everything else is a variation on one theme: if the supplier can't produce a batch number, a material cert, or a serial number you can verify, they either don't know what they're selling or don't want you to know.

(I didn't believe that when I started. I do now.)

Why I'm writing this

I'm the office administrator for a company of about 140 people in engineering and construction. I've handled purchasing for roughly eight years—or rather, closer to seven and a half if you don't count the six months I spent just shadowing the previous person.

I manage maybe $380,000 a year in parts, equipment, and safety service orders across nine suppliers. I don't engineer anything. I don't go to site. My job is to keep the process moving, keep finance from rejecting expense reports, and make sure the crews get what they actually ordered.

Which means my perspective is probably narrower than a site manager's—but also more paranoid about suppliers, because I'm the one who has to chase them when something goes wrong.

In 2021 we bought "ESCO-compatible" bucket teeth from a new supplier at roughly 20% below our normal channel. Handwritten receipt only, invoice "to follow." The invoice never followed, and neither did the supplier. Finance rejected the expense, and I had to absorb about $2,400 out of the department budget. Since then, the first question I ask a new supplier isn't about price—it's whether they can invoice properly and prove where the part came from.

What that looks like in practice

ESCO parts

ESCO is close to a reference standard in wear parts—the Ultralok system and that whole product family get treated as the benchmark in mining and heavy construction, which is exactly why there's so much "compatible with ESCO" product on the market.

From the outside, a budget tooth looks identical to a genuine one. The difference is alloy composition and heat treatment—things you can't see and won't notice until the tooth wears out in half the expected time. I had that math explained to me twice before it stuck.

What I do now: before any order, I ask for a batch number and a material certificate. If the supplier can't produce one, it's not automatically a scam—but the price had better reflect that they're not able to document anything.

ESCO elevator parts

This one trips people up. The ESCO that makes construction wear parts and the ESCO associated with elevator components aren't necessarily the same entity—they just share a well-known name. If you search "esco elevator parts," check the actual company name and product line before you assume it's the same supplier ecosystem you already know.

My rule: when two companies share a name, I verify on paper, not on a website header. It's saved me from at least one wrong-assumption order.

Crewe tractor parts and Honda generators

Same principle, different category. Serial number, warranty status, and whether it's factory-new or rebuilt.

Honda generators are particularly exposed to the "shop-refurbished sold as new" problem. What I do is ask the supplier for the serial number up front and have our local authorized dealer confirm its status. If the supplier hesitates to give it, that tells me something. To be fair, some resellers are just slow with admin—but the ones who can't produce a serial number at all are usually hiding something.

Who should inspect a crane?

This question comes up more than you'd expect from people who don't own cranes. The short version, per OSHA 29 CFR 1926.1412 (the construction crane and derrick standard):

  • Pre-shift inspections—typically handled by the operator or a designated person.
  • Monthly inspections—designated person, documented.
  • Annual comprehensive inspection—this is the one that specifically requires a qualified person under the standard.

"Qualified person" is a defined term. It isn't a title you can hand to whoever's available. If your inspection vendor can't explain their qualification in writing, I'd treat that as a red flag before booking them.

One insider note that applies here: the standard turnaround time an inspection company quotes you usually includes buffer they hold for their own scheduling. It's not necessarily how long your job will take—but it is how long you should plan around.

Where this approach breaks down

I should be honest about the limits. I'm not a technical buyer. My checklists protect against document and sourcing problems; they don't protect against a supplier whose product is genuinely out of spec but well-documented. For anything where alloy or load rating matters, I still route the final call through our engineering lead—I just make sure the paperwork is in order so the conversation can be about the part, not the invoice.

This also assumes you have purchasing consolidated under one person or team, like we do. If your company lets each site buy independently, the calculus is different—you'll need centralized vetting instead of a single gatekeeper.

And the last caveat: in a real crunch, I've absolutely let a trusted supplier ship first and send documents after. Sometimes it's the only way to keep the job moving. But I've also been burned once doing that. So my honest advice is to get the documents before the order whenever you can—and when you genuinely can't, at least get the promise in writing, in an email, with a date on it.

If your supplier contact is someone like Ross Gallatin, or any named rep, keep the conversation in email. It's harder to argue with a timestamp.
Share: LinkedIn Twitter WhatsApp
Posted in Excavator Insights · Permalink
Author avatar
Claire Dubois
Claire Dubois is a drilling, foundation, and compressed-air equipment analyst covering drill rigs, piling machines, rock drills, grouting units, and portable air compressors. She uses ISO 11886 commercial specifications for civil and geotechnical drilling and foundation machines, plus ISO 1217 acceptance tests for displacement-compressor flow and power, while examining torque, crowd force, pullback, airflow, pressure, and specific energy. Her guides help engineers match ground conditions, bore method, tool demand, dust control, setup clearance, compressor duty, and transport configuration.

Leave a Reply

Your email address will not be published. Required fields are marked *

Please enter your comment.
Required
Valid email required